I have all the SATA ports on this board populated. I do not use a RAID array. I am eager to purchase/install the new Samsung 960 EVO 250GB PCIe M.2. I am aware that this disables SATA ports. When reviewing forum posts, people most often report that e
Does anyone with that mobo have/had problems with USB devices misbehaving? Like mouse or keyboard freezing for a second? Turning off USB legacy support and switching xhci to enabled helped a lot but still from time time it happens and it is very anno
Hi guys. I have the above motherboard that I reflashed to the latest beta BIOS and then flashed back again to the last official F6 BIOS. My problem is thus: I have two ssd's, a samsung 850 one with relevant linux partitions, and an intel ssd with a w
F20 will basically brick the MB, dual bios won't help you from there. I went from F7 to F20 and boom, no POST, no beep, just on and off boot loop indefinitely. yea I know right, press power button till it on and off so second bios could kick in, but
I recently purchased (3/5/2017) a Gigabyte P15F-R5 laptop. Specifically this one: GIGABYTE 15.6" FHD P15FR5-NE2 Intel Core i7 6700HQ (2.60 GHz) NVIDIA GeForce GTX 950M 16 GB Memory 128 GB SSD 1 TB HDD Windows 10 Home 64-Bit Gaming Laptop - "ONLY
I contacted Gigabyte and asked what the phase layout is on a Z170 HD3 and they say Power phase on Z170-HD3 is 4+2+1. However there is only 6 chokes around the CPU. Does anyone know how this goes?
I am thinking of purchasing a Gigabyte Z270 motherboard and I am wondering if it has proper IOMMU and ACS for PCIe Passthrough for GPU? I will be running Windows Server 2016 and a Windows 10 Hypervisor (w/ gpu Passthrough).
Are there any for this system that arnt listed on the site as i can only find the 2/20 bios that is very out of date for ryzen mobos.
Hello! Can you please help me? I just got a new set of G.Skill - F3-14900CL8D-8GBXM [specs] I want to use them in my modded GA-EP45T-UD3LR mobo [specs] running a Xeon 5460 [specs] @ 400x9.5 BIOS is a modified F12e [this] Currently running 1600/12800
Hello all. I recently was trying out bios f20 for my z170x g7 and ran into a bunch of problems so I downgraded to f8 using fpt dos-z170..Now my mac address is lost and I can't use the Intel controller but Killer 2400 works fine. I've read a bit onlin
hi how are you ? sorry for disturbing you , recently i bought a GA-X99 Gaming5p and a 5820K and also installed a SSD M.2 Adata SP900 drive , when my computer wants to start windows 10 (UEFI , XHCI ) sometimes it boots normally and sometimes hanging u
Hello, the "GA-Z170X-Gaming-EU" Bios F8C. The bios F20C does not work on my motherboard, no automatic detection of the graphics card to reboot, I am obliged to pass on the HDMI motherboard to return to F8C. I tried all possible settings to see w
Hello guys! Need for modded bios for my mobo: GA-Z97X-gaming3 rev.1.0! Thank's a lot!
Hello, I have a GA-Z170X-Gaming G1 with an integrated BT running Windows 10 x64 I look a services and BT handsfree & BT Support Service are both running In device manager it shows MS BT LE numerator, Qualcom QCA61x4 BT 4.0 and MS BT Enumerator In dev
Has Gigabyte responded to the report that the ThinkPwn exploit impacts (at least) several Gigabyte motherboards; including the Z68-UD3H, Z77X-UD5H, Z87MX-D3H and Z97-D3H. Is Gigabyte going to issue BIOS updates to patch this? Can people on this board
hi guys, apologies if I have submitted this question in the wrong thread, I'm just after some advice please I have a i5 4690k overclocked to 4.5 ghz with 1.2v core. I was using 1.25v and I just thought I'd lower the voltage I first tried 1.2v with pr
Hello all, I am working on my overclock and can not figure out how to manually set my vcore. I am running UEFI and can change the DVID. However, once in windows...AIDA64 will show 1.411v under load. I go back and adjust my DVID to say -0.020 and rebo
I know this board is quite old, but I just got an extra set of the exact same RAM to bring the memory from 12 to 24GB. The bios sees the ram but it is not enabled. I have seen some previous answer on how this could be fixed. 1) change from auto to ma
Hi guys Will this SSD be compatible for my motherboard ? SAMSUNG 850 PRO 2.5" 256GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-7KE256BW - Newegg.com Do i need to update any Marvell/AHCI files ? I have already updated the BIOS to FHprof
Just bought a GA Z170-HD3P, I5 6500, 16 Gb memory and assembled all this with a fresh new SSD. Loaded a real licenced Windows 10. All seemed well runs very fast. Connected Ethernet at 1Gbs After a few hours and several reboots as data was moved onto